Panasonic EY4541 - Manual (Page 12)

Attaching or Removing Battery
Pack
1. To connect the battery pack:
Line up the alignment marks and at-
tach the battery pack.
• Slide the battery pack until it locks
into position.
Alignment
marks
2. To remove the battery pack:
Push on the button from the front to
release the battery pack.
Button
VI. VI. OPERATION OPERATION
1. Push the switch lock lever down, pull
the power switch.
• The speed increases with the amount
of depression of the power switch.
2. Once cutting is finished, release the
power switch.
3. Check that the temperature of the blade
has dropped sufficiently, and then re-
move the blade.
Cutting Cutting
NOTE:
• Check that there are no obstacles
to cut underneath workpiece.
• Check that there are no objects such
as nails in the material to be cut.
If the blade comes into contact with
any such objects during cutting, a
strong reaction force will be gener-
ated and severe injury may occur.
• Do not place your hand on the object
in the direction cutting is to take place.
If this is not observed, there is a risk
of injury.
• Do not touch the jigsaw blade im-
mediately after cutting.
If this is not observed, burns may oc-
cur.
- 12 -