Changing the product settings, Figure 3: keys used in programming mode – Precor UBK 815 User Manual
Page 60
Advertising
14
Product Owner's Manual
Changing the Product Settings
You must be in the Programming mode before you can
change the settings.
To access the programming mode:
1.
At the Precor banner, press the following keys in
sequence without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note: A PAUSE/RESET key appears on some products
and functions the same as the RESET key.
The programming prompts appear sequentially and in a
menu format.
ENTER
CLEAR
1
2
3
4
5
6
7
8
9
0
DISTANCE
PACE
AVERAGE SPEED
PAUSE/
RESET
OK
2
Figure 3: Keys used in programming mode
Advertising