Precor UBK 815 - Manual (Page 70)

24
Product Owner's Manual
Erasing the Error Log
When you no longer need the error log information, you can
erase the entries.
To erase the error log entries:
1.
Press QUICKSTART while any error description is
scrolling across the display.
2.
Continue to maintain light pressure on the key until the
message, H O L D T O C L E A R E R R O R S , scrolls off
the display.
3.
When you release Quickstart, the message N O
E R R O R S will appear in the display if the error log has
been deleted.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the equipment before erasing the error log.
4.
Press RESET to return to the Precor banner.