Precor UBK 815 - Manual (Page 63)

Product Features
17
Selecting a U.S. Standard or Metric Display
The equipment can display measurements in either Metric or
U.S. Standard. The default factory setting is U.S. Standard.
To change the display measurement:
1.
At the S E L E C T U N I T S prompt, press OK.
Use the navigational arrow keys to select a unit of
measure (
U S or M E T R I C ).
2.
Press OK to accept the displayed setting and move to the
next feature.
Setting a Workout Session Time Limit
You can limit how long a user can exercise on the equipment.
For example, if you set the time limit to 20 minutes, users can
only enter a session time between 1 and 20 minutes.
Note: The automatic cool down period is appended to the end
of any time-based program, so adjust the time limit
accordingly.
To set a maximum workout time:
1.
At the S E T M A X W O R K O U T T I M E prompt, press
OK. Use the navigational arrow keys to change the
displayed time limit.
Note: When you press and hold a navigational arrow key,
the number increments by five, for example, 1, 5, 10, 15,
20. When you tap an arrow key, the number increments
by one.
2.
When you have selected a maximum workout time, press
OK to accept the displayed setting and move to the next
feature.
You can also let a user exercise indefinitely by selecting N O
L I M I T . If you choose the N O L I M I T setting, you will
need to provide the following instructions to your users.
To exercise without a time limit:
1.
Select a program. The workout time appears in the
display.
2.
On the number keypad, type 240.
3.
Press the UP arrow key to display N O L I M I T , and
press OK.
The exercise session times available are between 1 and
240 minutes.