Pioneer PDR-509 - Manual (Page 35)

35
Additional Features
Additional Recording Features
COMPACT DISC DIGITAL RECORDER
◊ÛB-.?/
MONITOR INPUT SELECTOR TIME
When a finalized disc is loaded:
1
Press ERASE.
The display shows ERASE and TOC ? and the recorder function indicator
blinks to indicate erase standby mode.
❖ Press 7 (stop) to cancel erase here.
2
Use the jog dial or
4 and ¢ buttons on the
remote control to change the erase option.
Switch between:
TOC ? – erase the table of contents (returns disc to a non-finalized state)
ALL ? – erase all tracks
3
Press
8 (pause) to start erasing.
The function indicator lights and the display shows ERS (erase), and the
time remaining to completion.
❖ You can halt this erase process by holding down the 7 (stop) button
for 10 seconds.
Function indicator lights
when erasing
Re-initializing a disc
1
Press and hold ERASE for about four seconds.
The recorder prompts you to confirm with the message ALL DISC ERASE ?
and the recorder function indicator blinks to indicate erase standby
mode.
❖ Press 7 (stop) to cancel all disc erase here.
2
Press
8 (pause) to start erasing.
The process takes about five minutes plus the entire length of the disc.
During this time, the function indicator lights and the display shows dE
(disc erase), followed by the remaining time to completion.
❖ You can halt this erase process by holding down the
7 (stop) button
for 10 seconds.
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
REPEAT
ERASE
8
jog dial
FINALIZE
ERASE
TIME
FADER
DIGITAL
SYNCHRO
INPUT
SELECTOR
SKIP
PLAY
SET
SKIP ID
CLEAR
AUTO/
MANUAL
TRACK NO.
WRITE
REC
1 2 3 4
5 6 7 8
7 8 3
1 ¡ 4 ¢
Î
ERASE
8
4 ¢