Precor LOW-IMPACT TREADMILLS 9.33 - Manual (Page 56)

Owner’s Manual: Advanced Programming and Troubleshooting 54
Viewing the Hour Meter
HOUR METER scrolls across on the display.
4. Press OK to view the number of hours that the unit has
been in use or press the ▼ arrow key to move to the next
informational display.
The treadmill tracks the elapsed minutes, but the value
that appears is truncated to the nearest full hour.
5. When you are ready, press OK to move to the next
display (software version).
Viewing the Software Part Numbers
U-BOOT SW scrolls across the display.
6. Press OK to view the upper board boot software part
number (for example, 48996-100) or press the ▼ arrow
key to move to the next informational display.
7. When you are ready, press OK to move to the next
display (upper base application software part number).
U-BASE SW scrolls across the display.
8. Press OK to view the upper base application software
part number or press the ▼ arrow key to move to the next
informational display.
9. When you are ready, press OK to move to the next
display (lower board’s serial number).
LOWER SW scrolls across the display.
10.Press OK to view the lower board software version and
part number.
11.Write the numbers below. You will need these numbers
if you call Customer Support with questions. This
information will help rule out any software-related
problems:
UPPER BOOT SW: ___________________
UPPER BASE SW: ___________________
LOWER SW: ___________________
12.When you are ready, press OK to move to the next
display (serial number).
M9.33-931_Owners Manual.book Page 54 Friday, January 11, 2008 7:42 AM