Precor LOW-IMPACT TREADMILLS 9.33 - Manual (Page 57)

Owner’s Manual: Advanced Programming and Troubleshooting 55
Viewing the Serial Number
SER. NUMBER scrolls across the display.
13.When you are ready, press OK to view the serial number
or press the ▼ arrow key to move to the next
informational display. The serial number is helpful when
you contact Customer Support.
Note: If no serial number has been entered, then SER.
NUMBER NONE appears. Use the serial number found
on the front panel, near the power cord.
14.If you have not already done so, write the serial number
onto the Warranty Registration card. You can also
register online at www.precor.com.
15.When you are ready, press OK to move to the next
display (usage log).
Viewing the Usage Log
USAGE LOG scrolls across the display.
16.When you are ready, press OK to view each program, the
number of times it has been used, and the associated
cumulative minutes. The usage log is helpful in
determining user preferences in program selection.
17. Use the navigational arrow keys to select and view usage
information about each specific program.
Note: For a list of programs, refer to Programs and
Table 3.
18.When you are ready, press OK to move to the next
display (error log).
M9.33-931_Owners Manual.book Page 55 Friday, January 11, 2008 7:42 AM