Philips HP1500 - Manual (Page 15)

Headphone (figure 3)
13 Flexifit™ headband
a) adjust the comfort level of the inner headband to your personal
preference by simply pushing the adjustment button.
Installation
Base station power supply
1 Make sure the base station’s rated voltage corresponds to the mains
socket voltage.
2 Connect the AC mains cable to the AC mains socket at the rear of the
base station.
Always disconnect the mains cable if the base station is not to be used for a
long period of time.
3 In order to disconnect the basestation from the AC mains power, the AC
mains cable needs to be unplugged from the AC mains power wall socket.
The AC mains power wall socket should be easily accessible in normal
operating conditions.
Audio connections
OPTION 1: ANALOGUE STEREO SOURCE:
Connecting the digital base station to an analogue
stereo source (stereo TV, stereo VCR, (S)VCD player,
tape recorder, etc.)
Base station
1 Connect one side of the RCA stereo audio cable (included) to the line
output of the audio source and the other side to the analogue input of
the base station.
Make sure the red RCA plug (right channel) is connected to the red
connector (right channel) of the audio source.
The white RCA plug (left channel) must be connected to the white
connector (left channel) of the audio source.
2 Next take the RCA cable that most likely came supplied with your
analogue audio source. Connect one side of this second RCA stereo
audio cable (not included) to the line input of your amplifier or home
cinema receiver and the other side to the analogue output of the base
station.
ENGLISH 15
0912HP_EU 09-12-2003 12:12 Pagina 15