Philips HP1500 - Manual (Page 25)

3 Upsampling:
– Some SACD players allow for audio CDs to be upsampled from
44.1 kHz/16 bit to various higher sampling rates.
– When connecting your SACD player to the HP1500 base station
through the digital coaxial S/PDIF connector, you should not upsample
the audio signal.
– The HP1500 base station will recognize the following digital input signals:
– Stereo LPCM with sample frequencies 44.1 kHz and 48kHz
– Dolby® Digital (AC-3), up to 5.1 channels
– DTS®, up to 5.1 channels
IMPORTANT!
• In case of connecting a Super Audio CD player to the HP1500
base station making use of the SACD player’s digital outputs: do
not upsample the Super Audio CD digital output signal higher than
44.1 kHz.
• When connecting a DVD player to the HP1500 base station: do
not upsample the DVD digital output signal higher than 48 kHz.
In case an invalid digital signal is detected - for example a digital MP3 data
stream - the ‘DIGITAL’ indication LED in the HP1500 display window will be
illuminated in red. In case a valid digital signal is detected - for example a
digital DTS data stream - the ‘DIGITAL’ indication LED will be illuminated in
green.
ENGLISH 25
0912HP_EU 09-12-2003 12:12 Pagina 25