Philips HTS3373 User Manual
Page 12
12
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theater System to enjoy audio play with
multi-channel surround capabilities.
Connect audio from TV
(also used for EasyLink control)
1
Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on this
Home Theater System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this
•
connection, press AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the
display panel.
AUDIO OUT
AUX 1
AUDIO IN
1
Connect the speakers and subwoofer to
the matching jacks on this Home Theater
System.
Note
Ensure that the colors of the plugs and jacks
•
are matched.
Connect radio antenna
1
Connect the FM antenna to the FM75
jack on this Home Theater System
(for some models, this cable is already
connected).
2
Extend the FM antenna and À x its ends to
the wall.
Tip
For better FM stereo reception, connect to an
•
external FM antenna.
FM (75 Ω)
ANTENNA
EN