Philips HTS3373 - Manual (Page 27)

27
Search and store radio stations
individually
1
Press RADIO .
2
Press / .
It starts searching until a radio station
»
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To À netune the radio frequency, •
press / .
4
Press PROGRAM .
The preset station number blinks.
»
If no action is carried out within 20
»
seconds after the above step, it exits
the preset mode.
5
Press / (or the Numeric buttons ) to
select a preset number to store.
6
Press PROGRAM to conÀ rm.
Change tuning grid
In some countries, the frequency step between
adjacent channels in FM band is 50 kHz or
100 kHz.
1
Press RADIO .
2
Press .
3
Press and hold until ‘GRID 9’ or
‘GRID 10’ is displayed.
‘GRID 9’ for 50 kHz and ‘GRID 10’ for
»
100 kHz.
Listen to radio
1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for •
other radio stations remain
unchanged.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are
»
replaced.
Note
Check the radio antenna connection if no •
stereo signal is detected or less than 5 stations
are detected during radio installation.
English
EN