Pantech PG-3500 - Manual (Page 55)

They can also be customised to your needs. Select and
customise a profile to match your preferences, such as
when you are in a meeting or outdoors. The profiles
available are Normal, Silent, Meeting, Outdoor and Car.
Ring Tone [6.2.1]
Select ‘Menu>6.Settings>2.Sound Settings>[Edit] Soft
key>1.Ring Tone’ and press the [
o
] key, or press the [ u ]
key and the [Edit] Soft key in standby mode and select
‘1.Ring Tone’.
* You can choose the preferred ring type, ring volume.
- Ring Type: Ringing, Vibration, Vib then Ring, Vib and Ring,
Ascending, None (Quiet).
- Ringing Volume: Controls the volume in 8 levels (0~7).
Bell Sound [6.2.2]
Select ‘Menu>6.Settings>2.Sound Settings>[Edit] Soft
key>2.Bell Sound’ and press the [
o
] key, or press the [
u
]
key and the [Edit] Soft key in standby mode and select
‘2.Bell Sound’.
* You can choose the preferred melody to ring.
- Sound Box: Melody Sound, Bell Sound, User Sound.
- Bell Sound: Sound is composed of several groups such as
Melody Sound, Bell Sound and each Group has multiple tones.
User Sound presents the melody of ‘Menu>4.Media
Gallery>5.Sound Gallery’ as a consequence.
Message Alert [6.2.3]
Select ‘Menu>6.Settings>2.Sound Settings>[Edit] Soft
key>3.Message Alert’ and press the [
o
] key, or press the
[ u ] key and the [Edit] Soft key in standby mode and select
‘3.Message Alert’.
107 106
Settings Settings
You can select the preferred alert melody, its volume and
reminder period when you have new messages.
- Reminder: Use the [ l / r ] key to select one out of Off, Once,
Every 2 Mins, Every 5 Mins.
- Ring Volume: Controls the volume in 8 levels (0~7).
- Sound: Use the [ l / r ] key to set Message Alert Tone to Bell1,
Bell2, Bell3.
Key Tone [6.2.4]
You can select the keypad sound to be used for dialling or
in the menu screen.
Select ‘Menu>6.Settings>2.Sound Settings>[Edit] Soft
key>4.Key Tone’ and press the [
o
] key, or press the [ u ]
key and the [Edit] Soft key in standby mode and select
‘4.Key Tone’.
- Tone Type: You can turn the key tone on or off.
- Ring Volume: Controls the volume in 8 levels (0~7).
- Sound: Selects a key tone.
Flip Open Tone [6.2.5]
You can select a sound effect when you open or close the
folder.
Select ‘Menu>6.Settings>2.Sound Settings>[Edit] Soft
key>5.Flip Open Tone’ and press the [
o
] key, or press the
[ u ] key and the [Edit] Soft key in the standby mode and
select ‘5.Flip Open Tone’.
- Tone Type: Turns the key tone on or off.
- Ring Volume: Controls the volume by 8 levels.
- Sound: Sets Bell 1, Bell 2, Bell 3 to Flip Open/Close Tone.