Wap usb mass storage – Pantech PG-3500 User Manual

Page 67

Advertising
background image

131

130

Cache

[1.9]

Cache Mode

[1.9.1]

Sets up the Cache memory check.

- Always Check: The Cache is always checked whenever a URL is

loaded.

- Never Check: The Cache is never checked.

Clear Cache

[1.9.2]

This menu provides a function to clean the data stored in
the Cache (recently visited WAP pages).

Security Cert

[1.10]

You can see the saved security certificate.

Press the [Option] Soft key [

[

] to;

• Delete: Deletes a security certificate.

• Delete All: Deletes all security certificates.

Version

[1.11]

This function is for viewing the software version of the WAP
browser.

Select ‘Menu>8.Connectivity>2.USB Mass Storage’.

Provides the function to use the Micro-SD Card (Trans-
Flash Card) of the phone as a movable storage site by
using a USB Cable.

To use a mass storage

If the Mass Storage is set for [On]. “Connect USB Cable”
will be displayed. At this time, connect the phone with the
paired device, and when “Connecting” is displayed, you can
use the Micro-SD Card (Trans-Flash Card) as a movable
storage site from the paired device.

WAP

USB Mass Storage

NOTE: When the USB cable has been already connected before you set
the Mass Storage for [On], if you set Mass Storage for [On],
“Connecting” will be displayed immediately.

While reading/writing a file from Micro-SD card (Trans-Flash card), do not
remove the Micro-SD card (Trans-Flash card) as the card may be
damaged.

If the Micro-SD card (Trans-Flash card) is used as a movable disk, please
remove the device from PC when it is disconnected from the PC. Micro-
SD Card (Trans-Flash Card).

Please remove the device at USB Mass Storage, since the files saved in
the Micro-SD Card (Trans-Flash Card) may be damaged.

Advertising