Precor EFX 5.21i - Manual (Page 56)

6
adjuster into the base. Wrench
tighten the nut.
Remove the packing
material.
Clean the ramp with a soft cloth dampened in a
diluted solution of mild soap and water.
Level the EFX.
Before exercising, make sure the EFX does not wobble from side to
side or front to back. Ask a capable person for help to make
adjustments.
adjusting the rear pads can help, but will not compensate for
extremely uneven surfaces.
1. To remove any side-to-side
movement, rotate the rear pads.
2. To counteract any front-to-back
rocking motion, ask your assistant to
grasp the upper handrails and raise
the front of the unit off the floor. Use
a crescent or combination wrench to
loosen the nut on the height adjuster.
• Turn the height adjuster
to raise the height of the front end.
• Turn the height adjuster
to lower the
height.
Once you have the proper height
adjustment, use the wrench to turn
the nut counterclockwise and tighten
it securely against the base tube.
3. Have your assistant carefully lower the unit to the floor.