Plantronics CS70 - Manual (Page 7)

 Questions?
For fast, efficient Technical Support call:
800-544-4660 Ext. 5538
I
nStall
a
utomatIC
h
andSet
l
Ifter
Why use a handset lifter? The lifter greatly simplifies using
a headset with your desk phone. It lets you answer and
end calls without being near your phone.

S
T
E
P
firmly
press Lifter power
cord into red labeled port
on Headset Base.
Automatic Handset Lifter
Headset Base
(bottom view)
The HL10 Automatic Handset lifter is included with certain CS70 configurations and is
also available separately.
If you do not have the Lifter, skip to step 5.
1
. Verify that the base-to-desk Phone Cable is connected to the handset port of the desk
phone, and not the headset port (Refer to Step 2, Configuration A).
2
.
firmly press
the Handset Lifter power cord into the
red
labeled port to ensure a
complete connection.
A. Connect Handset Lifter power cord to Headset Base