Paxar 9854 - Manual (Page 27)

05/08 Rev. AB OPERATOR’S HANDBOOK Getting Started
9844/9854
1-19
Compact Flash
Card You need the following to load a print job from a Compact Flash card:
•
a 9854 printer
•
a Compact Flash card (copy the print job to the \FORMATS directory)
•
a computer with a PCMCIA drive and
•
an adapter for the Compact Flash card.
Rename the print job file on the Compact Flash card to autostrt.for so the
printer recognizes it. Once this is finished, the printer completes the print job
as soon as it is set to online mode.
Using Compact Flash Cards
¯ CAUTION! - Only use approved Compact Flash cards (order number
160002).
¯ CAUTION! - Wait five seconds after turning off the printer before
removing or inserting the Compact Flash card!
¯ The printer firmware cannot use more than 128 MB of card storage
capacity.
Fig. 11: Example of a 32MB Compact Flash card.
Inserting a
CF card 1. Turn off the printer. Wait five seconds.
2. Insert the Compact Flash card completely into the card slot. The wide guide
notch should face upwards (see Fig. 12).
¯ Push the Compact Flash card into the slot until the release button (1)
comes out. The card sits flush with the back wall.
Fig. 12: Inserting a Compact Flash card into a 9854 printer. If the Compact Flash card is
inserted correctly, it sits flush with the printer’s back wall (right).
Wide guide notch Slim guide notch
™