Paxar 9854 User Manual
Page 40
Advertising
![background image](/manuals/179539/40/background.png)
05/08 Rev. AB
OPERATOR’S HANDBOOK
Setup
9844/9854
2-12
Quick ribbon exchange
1. Open the pressure lever (Fig. 1).
2. Remove both ribbon rolls from the ribbon
reels. Remove the ribbon from underneath
the printhead (Fig. 2).
Load the new ribbon as follows:
1. Push the ribbon, which is between the
rolls, under the printhead (Fig. 2).
2. Push both ribbon rolls onto the ribbon
reels as shown (Fig. 1).
1
2
3
Advertising
This manual is related to the following products: