Panasonic 1210 - Manual (Page 61)

Customizing your IP Phone 1210—advanced features
61
Logging in to Virtual Office
Use the following procedure to activate Virtual Office on your Office IP
Phone from your Remote IP Phone perform the following steps.
1. Press the Services key.
2. Press the up or down keys to scroll, and
select
Virtual Office Login .
3. Press the Enter key.
4. At the prompt, enter your user ID.
5. Press the Enter key.
6. At the prompt, enter the home Station
Control Password (SCPW) .
If the user ID is not found locally, the
message Locating Remote Server
appears.
Note: After three failed logon attempts,
wait for an hour before you try to log on
again. Alternatively, contact your system
administrator to reset your password.
For more information, see
“Assigning an
SCPW” on page 51 .
(Services)