Panasonic 1210 - Manual (Page 81)

Operating your IP Phone 1210
81
Parking a call using the SPRE code or FFC
To park a call using the SPRE code or FFC, perform the following
procedure.
Retrieving a parked call
Use the following step to retrieve a parked call.
3. Press the Park soft key.
1. Press the Trans soft key.
or
Press the Conference soft key.
2. Dial the Call Park FFC.
3. To use an alternative DN from the
System Park DN or your own DN, dial
the DN where you want to park the call.
Otherwise, proceed to step 4.
4. Press the Transfer soft key.
or
Press the Conference soft key.
Park
or
Conf Trans
or
Conf Trans