Panasonic 1210 - Manual (Page 91)

Operating your IP Phone 1210
91
Disconnecting a conferee
Use the following procedure to disconnect a conferee.
indicator. Each key press changes the
screen to show a different active
conferee.
This action has no effect on the display
of other IP Phones involved in the
conference.
2. Press the Goodbye key.
If configured, the Conference Count
Display returns an updated count of
conferees. The LCD indicator turns off.
1. During a conference call, press the
Confdsp soft key until the conferee to
disconnect appears on the screen.
Press the Handsfree button to
disconnect the conferee.
2. For a single conferee, press the
Goodbye key. If configured, the
Conference Count Display returns an
updated total count of conferees. The
LCD indicator turns off.
or
For multiple conferees, repeat steps 1
and 2 until all conferees are
disconnected. Then press the
Goodbye
key.
(Goodbye)
ConfDsp
(Goodbye)