Peavey 1000 - Manual (Page 8)

Send and return jacks are provided for stereo patching of external effects devices, graphic equalizers, or
other signal processing devices to the program and monitor channels.
Grounds from other pieces of equipment should be connected at this point to minimize ground loop possibili-
ties between power amps, outboard signal processing units, turntables, etc.
Selects the inputs to accept input from either a magnetic phono cartridge (Phono [switch down]
position) or a CD or other line source (CD [switch up] position).
Left and right inputs are provided for output from turntables or CDs, depending on position of the
switch (40) on each channel.
Left and right inputs are provided for “line level” signals from tape decks, CDs, or other sources.
For use with high impedance microphones or high level sources equipped with a phone plug.
For use with low impedance microphones or low level sources equipped with a male XLR connector.
Send and return jacks are provided for mono patching of external effects devices, graphic equalizers, or
other signal processing devices at the microphone channel.