Peavey 1000 User Manual
Page 9
Input sensitivity measured with master fader at
8 Stereo inputs 4
and 4 Line
assignable crossfader
2 Microphone channels with
EQ and
automatic voice-over facility with on/off switch.
Switchable stereo headphone jack
15 V phantom power for
45 mm stereo Crossfade slider
One 16 V AC mixer lamp socket
nominal and channel fader at maximum.
0
1 volt RMS
Phono Position (RIAA):
Nominal Input Level: -40
(11
Input Sensitivity:
-50
(3
Input Impedance:
47 K ohms
ZIP left assign and right assign
Two Low Z balanced mic inputs with phantom
power
EQ
Automatic voice-over selector switch
Voice-over Hold, Depth, and Sensitivity controls
Manual voice-over button
Mic On/Off switch (Mic 1 and Mic 2)
60 mm mono level sliders
Effects Loop In/Out switch
(each channel):
l
Stereo (RIAA) Phono input switchable to CD
l
Stereo Line input
l
selector switch
l
Stereo selector switch for Line input or CD/
Phono input
l
60 mm stereo level slider
l
Independent Cue switch for each channel
l
EQ
l
and Line Trim controls
l
Stereo
LED display
l
60 mm stereo program level slider
l
Stereo/Mono switch
l
Effects Loop In/Out switch
l
Mic On/Off switch
l
60 mm stereo monitor level slider
l
Stereo/Mono switch
l
Cue Headphone level
l
Program Headphone level
l
Cue/Program Headphone selector switch
l
Stereo/Mono Headphone switch
CD Position:
Nominal
Level:
0
Input Sensitivity:
-10
V)
Input Impedance:
47 K ohms
Nominal Input Level:
0
(1 V)
Input Sensitivity:
-10
V)
Input Impedance:
200 K ohms
Nominal Input Level: -50
(3
Input Sensitivity:
-60
(1
Input Impedance:
3 K ohms
Nominal Input Level: -38
(14
Input Sensitivity:
-48
(4
Input Impedance:
Nominal Output Level:
0
(1 V)
Maximum Output Level:
V)
Minimum Load Impedance:
2 K ohms
Attenuation (Voice-Over switch enabled or Auto-
matic Voice-Over enabled): -3
to -25
refer-
enced to the output level
Phono Inputs (RIAA):
(20 Hz to 20
Line/CD Inputs:
(20 Hz to 20
Headphone:
(20 Hz to 20
1
Nominal Output:
Phono:
70
Line/CD:
88
9