Philips xDV434/19 - Manual (Page 20)

3139 246 16611
English
20
Disc Operations
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1
During playback, press PAUSEÅ.
➜
Playback will pause and sound will be
muted.
2
To resume normal playback, press
PLAY B.
Selecting track/chapter
●
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number.
➜
If repeat mode is active, pressing S /
T will replay the same track/chapter.
Searching backward/forward
●
Press and hold 1 / 2, then press PLAY
B
to resume normal playback.
➜
While searching, pressing 1 / 2
repeatedly again will decrease/increase
the search speed.
Stopping playback
● Press Ç.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Selecting various repeat/shuffle
functions
Repeat play mode
●
While playing a disc, press REPEAT
continuously to choose a ‘Play Mode’.
CHAPTER (DVD)
–
to repeat playback of the current
chapter.
TRACK/TITLE (CD/SVCD/VCD/DVD)
–
to repeat playback of the current
track (CD/SVCD/VCD)/title (DVD).
ALL
–
to repeat playback of all the disc and
all the programmed tracks.
SHUFFLE
–
to playback at random order.
OFF
–
to cancel the repeat mode.
Helpful Hint:
–
For VCD, repeat playback is not possible
if the PBC mode is switched on.
Repeating a section within a
chapter/track
1
While playing a disc, press REPEAT A-B
at your chosen starting point.
2
Press REPEAT A-B again at your chosen
end point.
➜ The section A and B can be set only
within the same chapter/track.
➜
The section will now repeat
continuously.
3
To exit the sequence, press REPEAT
A-B.
01-39 xDV434_Eng_191 13/04/05, 1:49 PM 20