Alarm display, On-screen display – Panasonic AG-DV2500P User Manual

Page 22

Advertising
background image

E-22

ON-SCREEN DISPLAY

– Alarm display –

Alarm display : Alarm messages are displayed as shown below, when an operation error

has occurred or when the unit is in a poor condition for operation. E.g.,
dirty head.

Display

Contents

LOW VOLTAGE

HEAD CLEANING
REQUIRED!

NO DV SIGNAL

The voltage of the DC input power is low. Continued operation will bring the unit to the
POWER OFF mode.
Displayed irrespective of the DISPLAY mode setting.

The video head is dirty. Please clean it with the dedicated head-cleaning tape.
(

☞ Page 8)

If the head is clogged, it will be detected in the PLAYBACK mode and displayed.
When the unit enters the STOP mode or the cassette is ejected, the display goes off.
Displayed irrespective of the DISPLAY mode setting.

Despite DV connection, signals are not received.
Displayed when DISPLAY mode is set to ON/AUTO.

3 2 K C H – 1 / 2

0

m i n

H E A D C L E A N I N G R E Q U I R E D !

I N V A L I D T A P E !

1 0 / 1 0 / 0 2

S T A N D B Y - O F F

1 2 : 0 0 : 0 0

T C R

0 2 : 0 0 : 0 0 : 0 0

A

B

Display at position A : Displays which show the state of the unit continues to be displayed

here until the conditions are rectified.

Display

Contents

INVALID TAPE!

LP TAPE!

DV NOT CONNECT

Data tapes for PC use or DVC PRO tapes has been inserted.
The cassette will be ejected.

The user attempts to play back a tape recorded in the LP mode.
This unit cannot record or play in the LP mode.

DV connection is not done.

Display at position B : Messages indicating operation errors are displayed for about 3 sec-

onds.
They are displayed when the DISPLAY mode is ON or AUTO.

Advertising