Panasonic AG-DV2500P - Manual (Page 29)

E-29
PREPARATION
– Loading/ejecting cassettes –
Please use standard DV cassettes or mini DV cassettes.
Loading the cassette
1.
Check the cassette.
• Set the rear slide.
Push it to “REC” for recording or “SAVE” to prevent lighted con-
tents from being erased accidentally.
• Check that the tape is not slackened.
2.
Check that the cassette indicator on the unit is unlit.
When a cassette is loaded, the cassette indicator will lit up.
3.
Load the cassette.
• For the standard DV cassette, just align it with the cassette slot
and insert.
• For the mini DV cassette, load it in between the left and right guides.
Set the tape, window face up, and push the cassette in slowly
until it is drawn in automatically.
¥ While the cassette is being loaded, the cassette indicator blinks.
The indicator lights up when cassette loading is complete.
EJECT
MENU
REW
SET
FF
PLAY
STOP
REC INH. PAL
AUDIO
NTSC DVCAM
PAUSE
POWER
REC A.DUB
CH
1 / 3
2 / 4 LINE
DV S-VIDEO
OFF
9PIN WIRELESS
INPUT REMOTE MIC
AG-DV2500
EJECT
MENU
REW
SET
FF
PLAY
STOP
REC INH. PAL
AUDIO
NTSC DVCAM
PAUSE
POWER
REC A.DUB
CH
1 / 3
2 / 4 LINE
DV S-VIDEO
OFF
9PIN WIRELESS
INPUT REMOTE MIC
AG-DV2500
Standard DV cassettes
Mini DV cassettes
Guide
REC
SAVE
Slide
EJECT
MENU
REW
SET
FF
PLAY
STOP
REC INH. PAL
AUDIO
NTSC DVCAM
PAUSE REC A.DUB
CH
1 / 3
2 / 4 LINE
DV S-VIDEO
INPUT
Cassette indicator
EJECT button
Ejecting the cassette
1.
Press the EJECT button on the unit.
¥ Ejection begins. During ejection, the cassette indicator blinks.
2.
Eject the cassette.
Memo
• The cassette can be loaded/
ejected even when the unit is
in the POWER OFF mode.
• The loading/ejection process
takes about 6 seconds.
• Ejection cannot be done with
the wireless remote controller.