Precor Programmable Ergometer 9.5sp User Manual
Page 6
page 6
Unpacking the M9.5sp Treadmill
Your M9.5sp treadmill is carefully inspected before shipment, so it should arrive
in good operating condition. Precor ships the unit in five pieces as listed below:
•
running bed assembly
•
handrail/display assembly
•
lift motor
•
lift motor cover
•
hardware kit (contents described below)
Carefully unpack the parts from the original shipping container.
CAUTION: This unit weighs over 150 pounds. To avoid back strain and to
ensure the safety of the unit and yourself, we suggest that you drop the
sidewalls of the box and slide the running bed assembly from the box,
rather than lifting the running bed assembly from the box.
After unpacking the treadmill, open the hardware kit and make sure that you
have the following items:
two hex-head shoulder bolts
one long shoulder bolt
four 3/8" screws
one 7/8" washer
one 3/8" locknut
two plastic plug caps
three cable ties
one 1/4" hex key
one 5/16" hex key
If any items are missing, contact your authorized Precor dealer. For the dealer
nearest you, call 1-800-4-PRECOR.
Important: The packaging for this equipment was designed to protect it during
shipment. Please store the original packaging in a safe place in case you need
to ship the M9.5sp treadmill in the future.