Pride Mobility Maxima - Manual (Page 28)

28 www.pridemobility.com Maxima
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that allows adjustment
to several positions.
1. Lift the tiller adjustment lever. See figure 10.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller in position.
SEAT LOCK LEVER
The seat lock lever locks the seat in one of four positions. See
figure 11.
1. Push the seat lock lever down to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rearward to one of
three settings to adjust the distance between the seat and the tiller.
See figure 11.
1. Remove the seat from your scooter. See IX. “Disassembly and As-
sembly.”
2. Remove the four bolts that fasten the seat to the seat platform.
3. Align the seat platform with the desired set of holes on the seat.
4. Install the four bolts securely.
ARMREST WIDTH ADJUSTMENT
The armrests can be adjusted inward or outward. See figure 11A.
1. Loosen the armrest adjustment knobs at the back of the seat
frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs.
The armrests also pivot upward to make getting onto and off of
your scooter easier.
ARMREST HEIGHT ADJUSTMENT
The height of both armrests can be adjusted upward or downward.
See figure 11A.
1. Remove the detent pin.
2. Raise or lower the armrest.
3. Reinsert the detent pin through the adjustment holes of
the upper and lower posts.
V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch
before adjusting the tiller or the seat. Never attempt
to adjust the tiller or the seat while the scooter is
in motion.
Figure 10. Tiller Adjustment Lever
Figure 11. Seat Adjustments
SEAT LOCK LEVER
SEAT BOLTS
Figure 11A. Armrest Adjustments
DETENT PIN
ARMREST ADJUSTMENT KNOBS
ADJUSTMENT
HOLES
UPPER POST
LOWER POST