Pride Mobility Maxima - Manual (Page 31)

31 Maxima www.pridemobility.com
I X . D I S A S S E M B LY A N D A S S E M B LY
To disassemble:
1. Place the manual freewheel lever in the drive (down) position.
2. Coil the charger power cord and store it in the rear storage compartment.
3. Lift the seat straight up and off the scooter. See figure 16.
4. Gently lift the rear shroud off of the scooter. See figure 17.
5. Disconnect the battery tie-down strap that holds the batteries in place.
6. Unplug both black and white 2-pin battery harnesses. See figure 18.
7. Unplug the front-to-rear harness from its mating plug. See figure 19.
Figure 19. Disconnecting The Front-To-Rear Harness Figure 18. Disconnecting The Battery Harnesses
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary while disassembling or assembling your scooter.
SEAT
REAR SHROUD
REAR SECTION
BATTERIES
BASKET
FRONT SECTION
Figure 15. The Maxima Disassembled
Figure 16. Seat Removal Figure 17. Rear Shroud Removal
DISASSEMBLY
You can disassemble the scooter into seven pieces: the
seat, the front section, the rear section, the rear shroud,
the basket, and the batteries. See figure 15. No tools are
required to disassemble or assemble your scooter, but
keep in mind that the disassembled sections of the scooter
take up more floor space than the assembled unit. Always
disassemble or assemble your scooter on a level, dry
surface with sufficient room for you to work and move
around your scooter-about 5 feet in all directions.
Remember that some scooter components are heavy and
you may need assistance when lifting them.