Initial setting, Set tel line, Set line mode – Panasonic KX-TG2356 User Manual
Page 16: Programmable settings, Line mode, Auto talk, Handset
Programmable Settings
16
Line Mode
The line mode is preset to “B” and generally should not be adjusted.
If “Line in use” on the handset and “
” on the base unit are not
displayed properly, the line mode selection is incorrect. Set line mode to “A”.
Auto Talk
The Auto Talk feature allows you to answer calls simply lifting the handset off the
base unit. You do not need to press [C] or [s]. The factory preset is OFF.
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [d]
or [B], then press Select.
3
Scroll to “Set tel line” by pressing [d] or
[B], then press Select.
4
Scroll to “Set line mode” by pressing [d] or
[B], then press Select.
5
Select “A” or “B” by pressing [d] or [B].
6
Press Save, then press [OFF].
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [d]
or [B], then press Select.
3
Scroll to “Auto talk” by pressing [d] or [B],
then press Select.
4
Select “On” or “Off” by pressing [d] or [B].
5
Press Save, then press [OFF].
Handset
LINE
IN USE
Initial setting
Back
Select
K
dB
L
Set tel line
Back
Select
K
dB
L
Set line mode
Back
Select
K
dB
L
Set line mode
:B
Back
Save
K
dB
L
Handset
Initial setting
Back
Select
K
dB
L
Auto talk
Back
Select
K
dB
L
Auto talk
:Off
Back
Save
K
dB
L
PQQX13988YA.book 16 ページ ２００４年２月５日 木曜日 午前１０時５分