Initial setting, Programmable settings, Lcd contrast – Panasonic KX-TG2356 User Manual
Page 19
Pr
epar
at
ion
For assistance, please call: 1-800-211-PANA(7262)
19
Programmable Settings
Base unit ringer tone
(use either the handset or the base unit)
Make sure the base unit is not being used.
Setting the base unit ringer tone by using the
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns
[4] to [7] : Melody patterns
• After pressing VOLUME [
<
] or [
>
], the base unit will ring using the current ringer
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [d] or [B], then press
Select.
3
Scroll to “Set base unit” by pressing [d] or [B], then press Select.
4
Press Select at “Ringer tone”.
5
Follow steps 4 and 5 of “Handset ringer tone” on page 18.
• When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 18).
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [d]
or [B], then press Select.
3
Scroll to “LCD contrast” by pressing [d] or
[B], then press Select.
4
Select the desired contrast by pressing [d] or
[B].
• The contrast will change.
5
Press Save, then press [OFF].
Base Unit
Handset
Handset
Initial setting
Back
Select
K
dB
L
LCD contrast
Back
Select
K
dB
L
LCD contrast
Low
High
Back
Save
K
dB
L
Ex. Level 3
PQQX13988YA.book 19 ページ ２００４年２月５日 木曜日 午前１０時５分