Taking a reading, Storing and calling up blood pressure readings – Panasonic EW3153 User Manual

Page 24

Advertising
background image

3

English

4

English

Taking a Reading

(continued)

To interrupt measurements quickly

Press the Quick air release button.

If pressure cuff will not deflate quickly enough

even if the On/Off and Start button is pressed,

press and hold the quick air release button on top

of the unit. The air will be released in

approximately 4 seconds.

If the pressure cuff comes off:

1 With the belt and seam

downwards, slide the pressure
cuff into the main unit.

Belt

With the belt and seam

downwards, slide the

pressure cuff into the

main unit.

Seam

2 Press the pressure cuff into

the groove of the main unit.

Either the front or the back can

be attached first.

Pressure cuff

Groove

Check that the

pressure cuff is

inserted in the groove

on the main unit.

*

When re-attaching, be sure not to touch the inside of the main unit

where the pressure cuff has been removed.

Doing so may result in an accident or injury.

Storing and Calling up Blood Pressure Readings

Up to 90 readings each can be stored in the memory for two people.

Storing blood pressure readings

All data is retained even when the batteries go flat or are changed.

When measurements are taken and no date has been set, the date and

time will be displayed as “

” on the wireless display.

(After approx.
2 seconds.)

(After approx.
2 seconds.)

(After approx.
2 seconds.)

1. After measurement has been completed, the

mark will be lit up.

Press the user selection button on the wireless

display to select the desired user.

To select User … To Step .

To select User … Press the user selection button.

2. Press the Memory/Recall button.
3. Memory storage is completed.

A total for

and of 90 readings can be stored

in memory. Readings over the memory capacity

will be recorded over the oldest measurement in

memory.

Readings cannot be saved when a measurement

has been unsuccessful (display of the error mark

for blood pressure readings). Readings can

be saved, however, when the mark is displayed

for the pulse rate.

The memory number, measurement date, and

time are alternately displayed in approximately

 seconds.

23-24

2008/01/15 14:54:29

Advertising
This manual is related to the following products: