ProForm PFCCEX97573 - Manual (Page 12)

12
Inspect and tighten all parts of the recumbent bike
regularly. The recumbent bike can be cleaned with a
soft, damp cloth. To prevent damage to the console,
keep liquids away and keep the console out of direct
sunlight.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 12 on page 7.
CRANK ADJUSTMENT
If the arms of
the Crank (29)
become loose,
they should be
tightened in
order to prevent
excessive wear.
Loosen the
crank nut on the
left arm of the
Crank. Place
the end of a
standard screw-
driver in one of the slots in the slotted bearing nut.
Lightly tap the screwdriver with a hammer to turn the
slotted bearing nut counterclockwise until the arms
are no longer loose. Do not overtighten the slotted
bearing nut. When the slotted bearing nut is properly
tightened, tighten the crank nut.
HOW TO STORE THE RECUMBENT BIKE
When the recum-
bent bike is not in
use, it can be
folded for com-
pact storage.
Refer to the
drawing at the
right. Loosen the
Lock Knob (68)
on the right side
of the Frame (1).
Slide the Seat
Frame (3) as far
into the Frame as
it will go. Tighten the Lock Knob. Store the recumbent
bike indoors, away from moisture and dust.
MAINTENANCE AND STORAGE
Crank
Nut
Slotted
Bearing
Nut
29
68
3
1