Planet Technology VIP-2100 - Manual (Page 72)

VIP-2100 User ’s manual - 67 -
Behind NAT Example 1:
VIP-2100 NAT Server Setting
One-by-One Static
IP Mapping
192.168.111.112 210.59.163.11
Static Port Mapping 192.168.111.111:5060 210.59.163.10:10000
VIP-2100 NAT Enable Setting:
Public Signal IP: 210.59.163.10
Public Signal Port: 10000
Public RTP IP: 210.59.163.11
Public RTP base port: 4000 (same as
“Interface→Advance’s Config”)
Public RTP Port Interval: 10
Behind NAT Example 2:
VIP-2100 NAT Server Setting
Static Port Mapping 192.168.111.111:5060 210.59.163.10:5060
RTP Channel 01 192.168.111.112:4000
4001
4002 210.59.163.10:10000
10001
10002
RTP Channel 02 192.168.111.112:4010
4011
4012 210.59.163.10:10003
10004
10005
.
.
. .
.
. .
.
.
RTP Channel 30 192.168.111.112:4310
4311
4312 210.59.163.10:10357
10358
10359
VIP-2100 NAT Enable Setting:
Public Signal IP: 210.59.163.10
Public Signal Port: 5060
Public RTP IP: 210.59.163.10
Public RTP base port: 10000 (same as
“Interface→Advance’s Config”)
Public RTP Port Interval: 0