Planet Technology VIP-2100 - Manual (Page 79)

VIP-2100 User ’s manual - 74 -
Figure 7.10-1
Parameters:
•
Auth IP: Radius Authentication Server IP address (default)
•
Auth Port: Radius Authentication Server Port
•
Acct IP: Radius Account Server IP address
•
Acct Port: Radius Account Server Port
•
Backup Auth IP: Backup Radius Authentication Server IP address
•
Backup Auth Port: Back Radius Authentication Server Port
•
Backup Acct IP: Back Radius Account Server IP address
•
Backup Acct Port: Back Radius Account Server Port
•
Secret Key: The shared secret key with RADIUS Server
•
Max Retry: The maximum retry times
•
Response Time (sec): The maximum wait for response time from
RADIUS Server
•
Auth Retry Interval (sec): The internal to resend the Authentication
packet to RADIUS Server.
•
Acc Retry Interval (sec): The internal to resend the Account packet to
RADIUS Server.
•
Switch Threshold: Switch to alternate RADIUS Server when failures are
occurred more than switch threshold.
•
Auto Inactive: Auto inactive an unused or not
o
Disable: Don
’t auto inactive
o Prepaid User: Auto inactive prepaid user only
o Postpaid User: Auto inactive postpaid user only
o All User: Auto inactive all unused user
•
Inactive prepaid: The minimum credit point threshold for a prepaid user
to be inactived
•
Inactive Period: The max unaccess days for a postpaid user to be
inactived
•
Charge Method: Billing charge method selection
o
Point per Second: Point / calling rate = seconds
o Second per Point: Point * calling rate / charge point = seconds
•
Auto Clean: Auto clean the inactive user