Philips AJ3915/79 - Manual (Page 2)

ENGLISH
Quick start as easy as ABC!
Step A
• Plug to the wall outlet.
Step B
Setting the Clock/Alarm time
1. Press and hold CLOCK or ALARM 1/ ALARM 2 until clock digits for hour flash.
2. Press repeatedly, or hold down ∞/ § to adjust the hours.
3. Press CLOCK or ALARM 1/ ALARM 2 to confirm the hour setting, and the
clock digits for minute flash.
4. Press repeatedly, or hold down ∞ / § to adjust the minutes.
5. Press CLOCK or corresponding ALARM 1/ ALARM 2 to confirm the minute setting.
• Corresponding ALM1 or ALM2 is displayed when alarm time is set to activate.
Step C
Selecting the Alarm mode
1. Press POWER to switch to standby.
2. Select your choice of alarm mode: either CD, Radio, or Buzzer by using the
CD•RADIO•BUZZER slider.
• At the set alarm time, the CD or Radio or Buzzer will switch on automatically.
3 ways to switch off the alarm
• Press once corresponding ALARM 1 or ALARM 2, or press POWER (ALM1 or ALM2 is still
displayed.).
• Press REPEAT ALARM (ALM1 or ALM2 is still displayed, yet flashing.).
• Press repeatedly corresponding ALARM 1 or ALARM 2 until ALM1 or ALM2 disappears.
C
TUNING
A
B
ALARM 1
CLOCK
ALARM 2
CD playback feature:
This CD clock radio can play only audio discs including CD-R (CD-recordable), CD-RW
(CD-rewritable)
.
1. Press POWER to switch on from standby.
2. Select CD source by pushing CD•RADIO•BUZZER to CD.
3. Lift the CD door to open.
4. Insert a CD with printed side facing up, and close the CD door.
5. Press ); to start playback.
6. To stop playback, press 9.
AJ3915_79-QSG 5/3/07 11:42 Page 2