Panasonic KX-FPG381 - Manual (Page 40)

3. Telephone
38
3.4.2 Using the base unit
1 Press {<} or {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {DIGITAL SP-PHONE}.
L The unit will start dialing automatically.
To search for a name by initial
Example: “LISA”
1. Press {<} or {>}.
2. Press {A} or {B} to initiate the directory.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 30).
L To search for symbols (not letters or
numbers), press {1}.
4. Press {B} repeatedly to display “LISA”.
L To stop the search, press {STOP}.
L To dial the displayed number, press
{
DIGITAL SP-PHONE}.
3.5 Editing a stored item
L Keep the front cover page open for button
locations.
3.5.1 Using the handset
Make sure the handset is not being used.
1 Press {<} or {>}.
2 Press {v} or {e} repeatedly to display the
desired item.
3 Press the right soft key ({EDIT}).
L If you do not need to edit the name, skip
to step 5.
4 Edit the name. For further details, see the
storing procedure on page 36.
5 Press {v}.
L If you do not need to edit the telephone
number, skip to step 7.
6 Edit the telephone number. For further
details, see the storing procedure on page
36.
7 Press {v}.
8 Press the right soft key ({SAVE}).
9 Press {OFF}.
3.5.2 Using the base unit
1 Press {<} or {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {MENU}.
4 Press {*}.
L If you do not need to edit the name, skip
to step 6.
5 Edit the name. For further details, see the
storing procedure on page 37.
6 Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
7 Edit the telephone number. For further
details, see the storing procedure on page
37.
8 Press {SET}.
3.6 Erasing a stored item
L Keep the front cover page open for button
locations.
3.6.1 Using the handset
Make sure the handset is not being used.
1 Press {<} or {>}.
2 Press {v} or {e} repeatedly to display the
desired item.
3 Press {HOLD/CLEAR}.
L To cancel erasing, press {<}.
4 Press {HOLD/CLEAR} again.
5 Press {OFF}.
3.6.2 Using the base unit
1 Press {<} or {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {MENU}.
4 Press {#}.
L To cancel erasing, press {STOP}.
5 Press {SET}.
Another method to erase a stored item
1. Press {<} or {>}.
2. Press {A} or {B} repeatedly to display the
desired item.
3. Press {ERASE}.
4. Press {SET}.
0519_FPG381.book Page 38 Monday, May 19, 2003 6:46 PM