Panasonic KX-FPG381 - Manual (Page 71)

8. Programmable Features
69
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed out after
every transmission.
“OFF”: Sending reports will not be printed out.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3
[
±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default) or “4”.
Code #06: Changing the ring setting in
TAM/FAX mode
TAM RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
“2” (default), “3”, “4”, “5”, “6”, “7” or “TOLL
SAVER
”. See page 55 for details.
Note:
L You can also program this feature with the
handset (page 75).
Code #10: Changing the maximum recording
time for each incoming message
RECORDING TIME
MODE=3 MIN
[
±]
“1 MIN”, “2 MIN” or “3 MIN” (default): 1 minute
to 3 minutes.
“GREETING ONLY”: Only plays your greeting
message.
Note:
L If you select “GREETING ONLY”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
L You can also program this feature with the
handset (page 75).
Code #11: Setting the remote operation ID
REMOTE TAM ID
ID=11
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Enter any 2-digit number (00–99).
L The default ID is “11”.
4. Press {SET}.
5. Press {MENU}.
Note:
L You can also program this feature with the
handset (page 76).
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE
[
±]
If you cannot make calls, change this setting
depending on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Note:
L You can also program this feature with the
handset (page 74).
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER
[
±]
“LETTER” (default): Letter or legal size paper.
“A4”: A4 size paper.
Code #17: Setting the ringer tone for external
calls
RINGER TONE
MODE=1
[
±]
To set the base unit ringer tone from one of 6
patterns for external calls. You can select “1”
(default), “2”, “3”, “4”, “5” or “6”.
Note:
L To set the handset ringer tone, see page 74.
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON
[
±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 51).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR
[
±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
“NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
0519_FPG381.book Page 69 Monday, May 19, 2003 6:46 PM