Philips Remote Starter - Manual (Page 11)

EN-9
EN
GLISH
3�3 Connect the antenna cable
Locate the 1. TV ANTENNA connector at
the back of the TV.
Connect one end of an antenna cable
2.
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit.
Connect the other end of the antenna
3.
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
3�4 Connect the mains cord
WARNING B
Verify that your mains voltage corresponds
with the voltage printed at the back of the
TV. Do not insert the mains cord if the
voltage is different.
To connect the mains cord
Note D
The location of the mains connector varies
according to TV model.
UK - EIRE
Locate the 1. AC IN mains connector at the
back or on the bottom of the TV.
Connect the mains cord to the
2. AC IN
mains connector.
Connect the mains cord to the mains,
3.
ensuring that the cord is tightly secured at
both ends.
3�5 Insert the remote control
batteries
Slide the battery cover off the back of the 1.
remote control.
Insert the two supplied batteries (Size AAA,
2.
Type LR03). Be sure the + and - ends of the
batteries line up with the markings inside
the case.