Philips Remote Starter - Manual (Page 12)

EN-10
Slide the cover back into position. 3.
Note D
Remove the batteries if not using the
remote control for an extended period of
time.
3�6 Switch on the TV
The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, turn on the mains (if mains switch is
available), then press POWER on the side of
the TV.
Note D
Certain TV models require you to press
and hold POWER for up to two seconds.
A beep sound indicates that your TV is
switched on. Your TV may take up to 15
seconds to start.
3�7 First time setup
The first time the TV is switched on, a
language selection menu appears.
Menu language
Español
Français
Hrvatski
Italiano
Magyar
...
Please select your
language...
using cursor up and
down
English
Next
Select your language and follow the
on-screen instructions to setup the TV.
Note D
If DVB-C is available, you will be prompted
to select Antenna or Cable. Antenna
installs DVB-T channels. Cable installs
DVB-C channels.
CAUTION C
Do not change DVB-C Settings unless
required.
Tip 1.
You can reinstall channels as described in
Section 6 Install channels.