Polycom 2W - Manual (Page 16)

SoundStation2W™ User Guide - 16
Ringer Type Selection
1. Press the Menu button and
choose Settings and press the
Select button.
2. Cycle through the options using
the Scrolling buttons and choose
Ringer Type, and then press the
Select button.
3. Sample the ring types by press-
ing the Scrolling buttons or the
<— and —> soft keys.
4. Press the SAVE soft key or Select
button to apply the selected
ringer setting.
► Press the Exit button to cancel
this change.
Backlight Adjustment
The SoundStation2W™’s display lights up when any
button on the keypad is pressed, or on an incoming call.
To turn the back light on or off:
1. Press the Menu button and
choose Settings and press the
Select button.
2. Cycle through the options using
the Scrolling buttons and choose
Back Light, and then press the
Select button.
► The current status of the back
light will be displayed.
3. Press the ON or OFF soft key or
cycle through OFF and ON by
pressing the Scrolling buttons.
4. Press the SAVE soft key or Select
button to apply the selected back-
light setting or the Exit button to
cancel this change.