Panasonic DMR E50 - Manual (Page 46)

46
RQT6920
Ad
v
a
nc
e
d
ope
ra
tion
Changing the unit’s settings
This chart shows the initial settings for this unit. See page 48 for details on menu operation.
≥ Underlined items are the factory presets.
Summary of settings
Tabs Menus Options
Channel Antenna System ( ➜ page 7)
Select to suit the type of antenna you are using. Channels are
set corresponding to the antenna system you select.
≥ TV ≥ CATV
Auto Channel Setting ( ➜ page 7)
The unit sets the channels automatically.
Preset Channel Caption ( ➜ page 9)
You can give preset captions to the channels.
Manual Channel Caption ( ➜ page 9)
You can set channel captions manually.
VCR Plus r CH Setting ( ➜ page 8)
Set the guide channels for use with VCR Plus i timer recording.
Set Up Off Timer
Select how long the unit remains on when it is not being used. ≥ 2 hr ≥ 6 hr ≥ Off
Remote Control Code ( ➜ page 45)
To avoid operating equipment other than the one intended
(when more than one remote controlled item is in the same
area), change the remote control code.
• Set Code 1 ≥ Set Code 2 ≥ Set Code 3
Auto Clock Setting ( ➜ page 49)
The unit adjusts the clock automatically.
Manual Clock Setting ( ➜ page 49)
You can adjust the clock.
Time Zone Adjust ( ➜ page 49)
Adjust the time zone if it was not set correctly after auto clock
setting. This appears only after auto clock setting is complete.
≥j 1 ≥ 0 ≥i 1
Re-initialize Setting
This returns all values in the SETUP menus, except for the
clock, channel settings, ratings level, and display language, to
the default settings. ≥ Yes ≥ No
Disc
[DVD-V]
Audio
Choose the audio language. Some discs start in
a certain language
despite any
changes you make
here. ≥ English ≥ French ≥ Spanish
≥ Original: The original language of each disc will be
selected.
≥ Other ¢¢¢¢ :Input a code ( ➜ page 48).
Subtitle
Choose the subtitle language. ≥ Automatic: If the language selected for “Audio” is not avail-
able, subtitles of that language will automatically
appear if available on that disc.
≥ English ≥ French ≥ Spanish ≥ Other ¢¢¢¢
Menus
Choose the language for disc menus. ≥ English ≥ French ≥ Spanish ≥ Other ¢¢¢¢
Ratings
Set a ratings level to limit DVD-Video play. The password
screen is shown when you select levels 0 to 7.
To enter a password
1. Input a 4-digit password with the numbered buttons.
≥ If you enter a wrong number, press [CANCEL] to erase it.
≥ Do not forget your password.
2. Press [ENTER].
≥ The lock symbol appears closed to show the rating is
locked.
3. Press [ENTER] to confirm the 4 digits.
If you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Press [SETUP] to select “Ratings” again and change ratings.
Setting ratings (When level 8 is selected)
8 No Limit: All DVD-Video can be played.
1 to 7:
Prohibits play of DVD-Video with corresponding ratings
recorded on them.
0 Lock All: Prohibits play of all DVD-Video.
Changing ratings (When level 0–7 is selected)
≥ Unlock Recorder ≥ Change Password
≥ Change Level ≥ Temporary Unlock
Video 3-D Y/C Separation
Turn 3-D Y/C separation on or off. ≥ On: Reduces noise for recording by separating the luminance (Y)
and color (C) signals received from the television station.
≥ Off: Reduces the ghosting that occurs when recording fast mov-
ing images.
Hybrid VBR Resolution
Switch between automatic and fixed hybrid VBR resolution
when recording. ≥ Automatic: The unit automatically switches resolution rates during
recording. The unit reduces block noise, which occurs dur-
ing MPEG compression, by selecting the optimum rate.
≥ Fixed: The resolution rate is fixed to ensure the resolution
rate is not reduced.
Continued on next page.