Panasonic DMR E50 User Manual
Page 53
53
RQT6920
Re
fe
re
nce
Sound
Page
Play
Displays
Remote control
No sound.
Low volume.
Distorted sound.
≥
Check the connections. Check the input mode on the amplifier if you have connected one.
≥
Turn V.S.S. off if it causes distortion.
5,
41–43
37
Cannot hear the desired
audio type.
≥
Press [AUDIO] to select the desired audio type.
23
Cannot switch audio during
stereo or SAP broadcasts.
≥
You have used digital connection. Set “Dolby Digital” to “PCM” or connect to other equipment
using audio cables (analog connection).
≥
You cannot change the audio type when a DVD-R is in the disc tray.
42, 47
—
Play fails to start even when
[
1
] (PLAY) is pressed.
Play starts but then stops
immediately.
≥
Insert the disc correctly with the label facing up.
≥
This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and
MP3 discs.
≥
The disc is dirty. Clean it.
≥
The disc may be badly scratched.
≥
You inserted a blank DVD-RAM or DVD-R.
≥
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
15
11
50
—
—
—
A title or chapter doesn’t play
when it is selected.
≥
Some titles and chapters on DVD-Video are not played when you have changed the ratings
level.
46
Picture distorted during
search.
≥
Some distortion is normal.
—
Alternative soundtrack and
subtitles cannot be selected.
≥
The languages are not recorded on the disc.
≥
You may have to use the disc’s menus to select languages.
—
17
No subtitles.
≥
Subtitles are not recorded on the disc.
≥
Turn the subtitles on.
—
36
Angle cannot be changed.
≥
This function depends on software availability. Angles can only be changed during scenes
where different angles are recorded.
—
You have forgotten your rat-
ings password.
≥
Return the ratings setting to “8”.
While the disc tray is open, press and hold [
:
/
6
] and [
5
/
9
] on the main unit at the
same time for 5 or more seconds.
—
The display is dim.
≥
Go to the Display menu and change the display’s brightness with “FL Display”.
47
“12:00” is flashing on the
unit’s display.
≥
The clock is not set.
49
The displayed recording time
and actual recording time dif-
fer.
≥
Displayed recording time is based on the number of frames per second. This number is sub-
ject to minute variations. When recording over long periods, these variations may result in the
difference between displayed recording time and actual recording time. This is normal.
—
The display doesn’t show the
correct time.
[MP3]
≥
Times may not appear correctly when searching through tracks recorded with a variable bit
rate.
—
The remote control doesn’t
work.
≥
[DVD, TV] is not switched to “DVD”. Switch to “DVD” when operating this unit.
≥
The remote control and main unit are using different codes. Change the code on the remote
control or main unit.
≥
The batteries are depleted. Replace them with new ones.
≥
Point the remote control at the remote control sensor on the main unit.
≥
Remove obstacles from between the remote control and main unit.
12
45
6
6
—
Cannot operate the televi-
sion.
≥
Change manufacturer code. Some televisions cannot be operated even if you change the
code.
≥
[DVD, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving channel for the
television.
10
12