Polaroid P100i - Manual (Page 39)

31
P100i
User’s Manual
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
Polaroid
SCREEN MESSAGE
PRINTING BLACK
PRINTING VARNISH
PRINT HOLOGRAM
CLEAN PRINTER
CLEAN MAG HEAD
CLEANING
REMOVE RIBBON
OUT OF RIBBON
MECHANICAL ERROR
OUT OF CARD
COVER OPEN
HEAD OPEN
COMMAND ERROR
PARAMETERS ERROR
MEANING
A monochrome panel is
being printed.
The overlay is printing
A hologram overlay is being
printed
The printing is prompting
operator maintenance
The printing is prompting
operator maintenance
The printing is performing an
internal cleaning routine
The ribbon has not been
removed while the cleaning
operation is in progress
The printer ribbon has run out
The printer has an error moving
the card internally
The card feeder is empty
The cover is open
The print head is not locked into
position
The data being sent from the
host is not recognized
The features of the card are not
recognized
ACTION
Carry out the cleaning
procedure as detailed in
section 4 of this manual
Carry out the cleaning
procedure as detailed in
section 4 of this manual
Remove ribbon
Replace printer ribbon
Remove the jammed card.
Ensure the card is not out of
specification
Add more cards or adjust the
card feeder to accept the
cards
Close the cover
Lock the print head in its
lower position
Check that the data is
suitable for printing. Try
reprinting a card from known
“good” data
Check the Windows driver
options and printer type