Polaroid P100i - Manual (Page 53)

45
P100i
User’s Manual
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
Polaroid
A.· MEDIA LOADING ORIENTATION
Position the cards with the Smart Card Chip
at the top of the card and towards the
printer.
B.· SMART CARD CONTACT STATION INTERFACE
When a command to the parallel or USB
printer interface sends a card to the Smart
Card Contact Station, the printer connects
the Smart Card Contact Station to the female
DB-9 connector on the rear of the printer.
An attached external Smart Card
Programmer can be used to program Smart
card chips.
DB - 9 SMART CARD DB - 9 SMART CARD
PINS CONTACT POINTS PINS CONTACT POINTS
1 CI (VCC) 6 C6 (Vpp)
2 C2 (Reset) 7 C7 (I/O)
3 C3 (Clock) 8 C8 (RFU)
4 C4 (RFU)
5 C5 (GND)
9 (GND when chip is at station)
Refer to the Card Printer Programmer’s Manual for complete
programming information.
DO NOT position printing over the Smart Card
Chip.