Panasonic TH-LB30NT - Manual (Page 16)

16
PCSearch Setting
Current setting [Single] - [S-MAP]
Select access port
Standby Live Mode
Update
Close Connect Connectability
n < Projector Search> Window – [S-MAP] (List display) (See page 18)
A
Setting menu display
Choose to display or hide the B to F buttons
B
Access Devices (See pages 34, 40, 42)
When only one projector is connected, select [ ]. When
multiple projectors are connected, select [ ].
※ Multiple projectors [(Multiple projectors icon)] are
available when “1-4/U” is selected.
C
S-MAP (See page 18)
Display <Projector Search> window – [S-MAP].
D
1-4/U (See page 19)
Display <Projector Search> window – [1-4/U].
E
PC Search (See page 20)
Display <PC Search> window.
F
Other search (See page 29)
From the projectors that are currently switched on, search
for the projector of specified IP address, domain name,
and ID. (From all network numbers except for [U (user)])
G
Updates the list of found projectors.
H
Switching Display Window
: <Projector Search> window – [S-MAP] is displayed.
(See page 15)
: <Projector Search> window – [S-MAP] (list display)
is displayed. (Upper figure)
I
This mark appears for the projectors that have been
searched and found through wired LAN.
J
ID (See page 29)
Display projector’s ID.
K
Mode (See page 34)
Display projector’s mode or style.
L
Available modes and functions
Unavailable modes/functions among [Live mode ] and
[Multi live mode ] are displayed with [ ] overlaid on
them.
M
The number of people connected to this projector
Display the number of people that are connected to this
projector.
N
The status of this projector
Display the projector’s connection status.
O
[ ] will be displayed when password is required for
the connection. (See page 29)
P
Connection message
Blinks when connection is not possible. Click to display
information on resolving the issue. (See page 22)
Q
The [Projector Name] of the selected projector and the
name given in the favorites are displayed (See page 49).
Guides for the operating status and connection method
etc are also displayed.
R
Connectability
The name and ID of projectors are displayed on the upper
left of the selected projector’s projection screen.
Once it is confirmed as connectable, the message
“Projector is available.” will appear on the PC screen.
S
Connection
Connect to the selected projector.
Connecting with wireless LAN
(cont.)
M
N
L
O
S
K
J
Selected
projector
P
Q
R
H
B C D E F G
Current settings
A
I