Panasonic TH-LB30NT - Manual (Page 22)

22
Detected issue Displayed information Remarks Reference page
A firewall or
network bridge is
detected
[****] ※ is installed.
When destination cannot be
identified, deactivate [****] which is
the cause.
• Has your firewall in Windows XP been disabled?
• Is Wireless Manager mobile edition 5.5 registered
in [Exceptions] ([Control Panel] → [Security Center]
→ [Windows firewall]) with the Windows XP SP 2?
• Is this software registered in the [Exceptions] tab
in [Control Panel] – [Windows Firewall] – [Allow
program through Windows firewall] in Windows
Vista?
• Are any firewall-containing applications installed?
• If you do not expect ever to use Network Bridge
and see no need for it, delete it from your system.
P.73 - P.76
Connecting with wireless LAN
(cont.)
Connection error messages
If wireless LAN is not available, [ ] will blink in lower left corner of the
<Projector Search> window ([S-MAP] or [1-4/U]).
Click the [ ] button at this time to display information on resolving the
issue as shown below.
The displayed information is as follows.
※ “Windows Firewall”, “Network Bridge” and other security software found will appear in [****].
PCSearch Setting
Current setting [Single] - [1-4/U]
Select access port
Update
Close Connect Connectability
All
Click the [Detail] button to display detailed information.
Note that the [Detail] button is available only when the Firewall/
Connection Utility is found active.
To perform the selected Firewall/Connection Utility process every
time, check [The operation is always performed from next time.]. This
message will no longer be displayed from the next time the software
is launched. If you want to display the message when the software is
launched, check the corresponding item of <Firewall/Wireless LAN
Utility Message> on the [Other2] tab of [Option]. (See page 50)