Panasonic TH-LB30NT - Manual (Page 25)

25
Before getting started Wireless Manager ME 5.5, the PC's IP setting must be set to [Acquire IP address automatically]. Before
use, contact your network administrator to make sure the proper setting.
A
Projector settings
When logging on without administrator authority
1
Turn on the projector and press the [NETWORK] button on the remote control.
2
Press the menu button to open the [NETWORK] menu, and then select from among
[USER 1] through [USER 3] for [WIRELESS LAN] and press [ENTER].
3 In wireless LAN detailed setting 1/3, turn off [DHCP ※ ], configure [IP address ※ ],
[SUBNETMASK ※ ], and [DEFAULT GATEWAY ※ ], and then click [NEXT].
<Example>
Connecting with wireless LAN
(cont.)
※“Glossary” (See page 70)
• Wireless LAN and wired LAN cannot be used in the same segment.
• When multiple devices are connected, a unique IP address must be allocated to each device.
4 In wireless LAN detailed setting 2/3, enter [SSID ※ ] and set [MODE] to [AD HOC ※ ],
and then click [NEXT].
<Example>
※“Glossary” (See page 71)
• SSID has to be entered in lower-case alphanumeric letters.
• See pages 53 to 55 for information on other network settings.
5
Press [OK] in wireless LAN detailed setting 3/3.
WIRELESS DETAILED SETUP
NEXT CANCEL
RETURN
SELECT
ENTER
DHCP
IP ADDRESS
SUBNETMASK
GATEWAY
192.168. 11.100
OFF
192.168. 11. 1
255.255.255. 0
NAME CHANGE
USER1 1/3
USER1
WIRELESS DETAILED SETUP
NEXT CANCEL RETURN
RETURN
SELECT
ENTER
MODE
AUTHENTICATION
ENCRYPTION
CHANNEL
OPEN
AD HOC
1
NONE
SSID Panasonic Projector
2/3 USER1