Wired lan settings, Default wired lan settings, Wired lan settings ……………………………………………… 52 – Panasonic TH-LB30NT User Manual
Page 52: Default wired lan settings ……………………………………… 52, Network/security setting of the projector, Cont.)
52
You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
DHCP
※
:
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
※
],
[SUBNETMASK
※
] and [DEFAULT GATEWAY
※
].
Wired LAN settings
WIRED DETAILED SETUP
OK
CANCEL
RETURN
SELECT
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
192.168. 10.100
OFF
192.168. 10. 1
255.255.255. 0
The following wired LAN settings are set before the projector leaves the factory.
DHCP
: OFF
IP ADDRESS
: 192.168.10.100
SUBNETMASK
: 255.255.255.0
DEFAULT GATEWAY : 192.168.10.1
Default wired LAN settings
A wired LAN and wireless LAN cannot be used in the same segment.
Network/Security setting of the projector
(cont.)