Plantronics Voyager 510S - Manual (Page 12)

1 Plantronics Voyager 510 S Setup Guide
While on a call, adjust the listening volume by using the Listening Volume Switch on the
back of the base.
Adjust Listening Volume
Listening Volume Switch
Position 1 = Loudest
Position 4 = Softest
Speaking Volume Switch
Position A = Softest
Position D = Loudest
While on a call, set the Speaking Volume Switch to the best setting for the listener (a paper
clip or pen tip can help). Too high a setting can produce an uncomfortable echo for you
and distorted sound for your listeners. You will be able to make minor adjustments to
speaking volume while on a call using the Speaking Volume Control on the back of the
base.
Adjust Speaking Volume
Volume settings are pre-set at the factory and for most phones will not require
adjustment. To ensure settings are correct for your phone, make a test call. If
you can not hear or be heard clearly, refer to the volume adjustments on the
following pages.
On the headset, press the (+) on the Listening Volume Button to increase the volume.
Press the (–) to decrease the volume
To Fine Tune Listening Volume
Listening Volume Button
If the sound quality is poor or background noise is evident after these adjustments
re-adjust the configuration dial for better quality. See page 9.