Plantronics Voyager 510S - Manual (Page 9)

 Questions?
For fast, efficient Technical Support call:
800-544-4660 Ext. 5538
6
. With the other hand, press the Call Control Button on the headset.
This will activate the Handset Lifter and lift the handset from the phone.
If you hear a dial tone, the lifter height is set correctly and needs no adjustment. Press the Call
Control Button to return the handset to the cradle. Please continue with section D “Mount the
Lifter in permanent position” below. If you do not hear a dial tone continue with section C.
If you do not hear a dial tone, the Lifter may not be raising the handset high enough
or the Configuration Dial may need adjusting.
C. If you do not hear a dial tone
Press Call
Control Button
2
. If you still cannot hear a dial tone, you will
need to change the setting on the
Configuration Dial. Using a coin or
paperclip, turn the Configuration Dial
to a different setting until you hear a dial tone.
If you still cannot hear a dial tone, please call
Technical Support at 800-544-4660 Extension 5538.
Multiple settings might work with your phone; however, only one is the
optimal position.
1. Check the Lifter height adjustment by moving the Lifter Height Switch to a higher position.
See Section B and repeat steps 4 through 6.
If you hear a dial tone, the lifter height is now set correctly. Please continue with
the next section “Mount the Lifter in Permanent Position”.
Position
Indicator
Configuration
Dial